SOLAR MOUNTING STRUCTURE
Powerful solar mounting structure is designed to bear the loads and stresses during operations. Ideal for applications such as domestic water supplies, pumping slurries and sewage management, fire protection system, cooling and heating applications
Introduction
Solartive solar mounting structure constitutes roof-mounted structure, ground-mounted structure, tracking system mounted, etc.
The fabrication factory area of 35,000 sq. feet at Ranchi allows a monthly capacity of up to 1000 tons per month. The In-house tool room allows any customized design to be easily manufacturable with the optimized time. In order to maintain the quality of the structure.
- The high-quality galvanized coating
- After fabrication all structural steelwork shall be painted with one coat of red oxide, Zinc chromate primer confirming to IS 2074-1962, and two coats of red oxide zinc chromate primer on the surface where members are bolted to each other back-to-back.
- After erection, two coats of Aluminium paint shall be applied confirming to IS: 2339-1963 on exposed surfaces.
- Gives long-lasting life to the structure
Features
Solar Mounting Structure
Frame Material: Mild Steel, Galvanized Iron
Color: SIlver
Material: Steel, Monocrystalline Silicon, Polycrystalline Silicon
Design Type: Pipe & Angle
Brand: Solartive
Design: Customized
Thickness: Varied as per load and wind speed
Structure Design
The Solartive team of highly qualified design engineers, prepared the through details, drawing, process drawings, Assembly drawing, BOM to the members and the Nut, Bolt, Washers, which allow assembler easy assembly at the sites
Analysis
The design team analyses the load capacity of the structure with the designated water tank capacity. Also analyses the strength of the structure to the wind loads up to 140 km/hr from any direction which allows high durability. For custom design for any government project design team will prepare a detailed drawing with reference to the project drawn then only the project gets executed.