Product Rating:
4.5/5
SOLAR PUMP CONTROLLER WITH RMS
Our smart controller integrates online, offline and Wi-Fi functions and supports a wide range of frequency bands due to which it can operate in any remote location around the world.
Introduction
All of our pumps have a digital controller which controls the pump system and provides information about what the system is doing.
For simple easy to understanding, casual viewing of system status, the Solar Pump Controller provides all the information needed. Pump status, speed, common errors, remote switch status, and communication status can all be clearly seen.
- Easy Configuration for a class of motor types.
- Reducing on-field installation complexity.
- Better Pump Output Per Available Solar Watts.
- Pump starts earlier in the day and can run even in low solar intensity.
- Motor drive limits output safely as per motor rating.
- Ability to add more panels if required.
- Integrated communication.
- Supports remote monitoring, remote access and control, and over-the-air firmware upgrade.
- Extensive protection and monitoring of various parameters of operation.
- Increased reliability, protects the motor and drive from catastrophic failures.
- IP65 enclosure
Features
Usage Application: Solar Pump
Brand: Solartive
Origin: Made in India
Technology: 2G (900/1800MHz) / 4G GSM module, LTE category 4 module optimized for M2M and IoT applications, Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/Edge Coverage
GNSS: GPS Supported
Sim Type and GNSS: 3V and 1.8V - Micro SIM Card and GPS
Antenna: High dBi Flexible Sticker Antenna LTE + High dBi Flexible Sticker Antenna for GPS
Communication Type: Modbus - Master - RTU
Communication Channel: RS - 485 with Transient Voltage Protection
Bluetooth: BLE 5.0 Supported
Digital Input: 2 Channel Potential Inputs
Analog Input: 2 Channel, Current: 2 to 20mA
Display: 16*2 Alpha Numeric Display
Applications: Web-portal and Android Application for monitoring and handling the pump
Memory: Internal memory for offline storage in the RMS that can be retrieved through SD card
RMS Application
Customers choose Solartive Solar Pumps because of the advanced system features that are available via Solartive Web and Android applications.
All our partners and customers can now benefit from our Web Portal and Android Application which can be easily downloaded from Google Play Store.
Our Solar Water Pumps are integrated with a Remote Monitoring System, due to which they are easy to configure, provide rich information to technicians and customers plus they can be operated in all weather conditions.
Solartive has an in-house solar pump RMS solution (web and Android applications) with 2G and 4G communication as per MNRE (Ministry of New and Renewable Energy) guidelines and all features covered as per EESL (Energy Efficiency Services Limited), which allows users and the government to monitor all data regarding solar power generation, consumption, pump run time, pump water supply in LPM, and if any fault occurs, it will instantly give an alert through SMS or call and give data on the cloud of any analysis. This gateway enables the remote monitoring of solar pumps. The interactive web portal represents previous and aggregated data, comparative analytical diagnosis, and a guided root cause for fault analysis. All data is logged and can be securely reviewed and analyzed from any location of the pump at any time. Users can also switch on and off and schedule their timing if there is a limited supply of water in a specific location to avoid waste.